Pillow Block Bearing UCP212

Shape:Flanged Pilot Type; Number of Bearings:Double; RoHS:6; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6801; Width T(mm):25; Bearing Retained:No; Number of Bearings:Double; Days to Ship:7 Days;

Specifications/Environment:Standard; Basic Dynamic Load Rating(N):59500; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; D:80; Combination of Angular Contact Ball Bearings:Back Combination; Types:7*** series; Rolling Element Material:Steel; Outer Ring Shape:Flat; Holder Symbol:L1;

Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Shape:Flanged Pilot Type; Flange Shape:Round Type; Number of Bearings:Double; Days to Ship:8 Days; Volume Discount:Available; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6001;

Shape:Flange Type; Bearing Retained:No; Volume Discount:Available; Days to Ship:7 Days; Bearing Part Number:6803; RoHS:6; Type:Bearings with Housin; Number of Bearings:Single; Seals:VV (Non-Contact Rubb; Bearing Retained:No;

f0:14.4; B:20 mm; Characteristic inner ring frequency, BPFI:5.91 Hz; Brand:SNR; Characteristic outer ring frequency, BPF0:4.09 Hz; Nref:8,200 rpm; Dynamic load, C:34.4 kN; ra max:1 mm; Da max:83.5 mm; rs min:1.1 mm;

N1:26 mm; Designation of bearing:UC211G2T20; d:55 mm; L:219.5 mm; s1:27.8 mm; T max.:200 °C; H:61.3 mm; G:M6x1; C0:29.2 kN; B:55.6 mm;

Bearing Retained:Yes (with retaining; RoHS:6; Holder Surface Treatment:Not Provided; Volume Discount:Available; Days to Ship:8 Days; Volume Discount:Available; Bearing Material:Stainless Steel; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single;

H:105 mm; A1:36 mm; J:146 mm; C:31.85 kN; C0:20.8 kN; G:M6x1; Weight:3.08 kg; A:70 mm; H2:157 mm; N1:25 mm;

f0:16.1; Mass:1.23 kg; Characteristic inner ring frequency, BPFI:13.33 Hz; Characteristic rolling element frequency, BSF:15.05 Hz; B:20 mm; da min:166.5 mm; ra max:1 mm; Min operating temperature, Tmin:-25 °C; Brand:NTN; Radial clearance class:CN;

RoHS:6; Shape:Flanged Pilot Type; Bearing Retained:No; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):40;

Full Timken Part Number:QAAFX18A085SB; e - Geometry Factor:0.23; Locking Style:Double Concentric; Dimension J (Bolt Size):0.75 in; Grease Lubrication - M/N Seal:1400 rpm; C - Dynamic Load (Basic):79700 lb; Dimension BC:9.5 in; Pre Install Clearance Max:0.0039 in; Eng Internal Radial Clearance - Min:

Ca max:3.18 mm; Ca min:2.92 mm; b max:1.65 mm; Db min:40.5 mm; D3 max:33.17 mm; Fatigue limit load, Cu:0.16 kN; rs min:0.6 mm; Brand:NTN; D:35 mm; Snap ring reference:R35;

Load Direction:Radial; B:8; D:32; Specifications/Environment:Standard; Type:Ball; d:15; Basic Dynamic Load Rating(N):5600; Size Standards:Metric System; Size Standards:Metric System; Rolling Element Material:Steel;

J:76.2 mm; T max.:100 °C; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; H:42.9 mm; G:R1/8"; H2:82 mm; B:38.1 mm; C:19.5 kN; Weight:0.9 kg;

Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Shape:Flange Type; Flange O.D. H(φ):47; Holder Surface Treatment:Clear Anodize; Shape:Flange Type; Number of Bearings:Double; Seals:DD (Contact Rubber S; Flange Shape:Compact Type;